Student Symposium
Mechman
Student Symposium
Mechman
The Mechanics and Manufacturing Engineering Student Symposium (Mechman) aims at providing a new platform for the dissimation of results obtained on the second semester of the Master of Science Mechanical Engineering with the three specializations Manufacturing Technology (VT), Design of Mechanical Systems (DMS) and Electro Mechanical System Design (EMSD). Furthermore the students on the second semester of the Master of Science in Materials and Nanotechnology with the specializations in Materials Technology (MTEK) and Nanomaterials and Nanophysics (NNF) participate.
The symposium is organized as a scientific venue, where the results are presented in the form of papers, posters, and oral presentations. By applying the scientific method of presentation, it is the intention, that the students get familiar with this form of dissimation of results, thus making them able to present results in that format, and perhaps more importantly be able to use the vast amount of knowledge available in that form.
The organising committee gratefully acknowledge Grundfos for sponsoring the 11th MechMan symposium.
General information
MechMan is organized by Department of Mechanical and Manufacturing Engineering, Aalborg University, Denmark.
CONFERENCE CHAIRS CHAIRMEN
Assoc. Prof. Jens Chr. M. Rauhe, Aalborg University, Denmark
Assoc. Prof. Jens H. Andreasen, Aalborg University, Denmark
Co-chairmen
SCIENTIFIC COMMITTEE
Assoc. Prof. Jørgen A. Kepler, Aalborg University, Denmark
Assoc. Prof. Benny Endelt, Aalborg University, Denmark
Assoc. Prof. Shaoping Bai, Aalborg University, Denmark
Professor Ole Madsen, Aalborg University, Denmark
Assoc. Prof. Peter Omand Rasmussen, Aalborg University, Denmark
Assoc. Prof. Lars Rosgaard Jensen, Aalborg University, Denmark
Assoc. Prof. Jan Schjødt-Thomsen, Aalborg University, Denmark
Assoc. Prof. Jens Chr. Rauhe, Aalborg University, Denmark
Assoc. Prof. Jens H. Andreasen, Aalborg University, Denmark
The Student Symposium on Mechanical and Manufacturing Engineering focus on topics related to the second semester of the Master of Science in Mechanical Engineering with the three specializations Manufacturing Technology (VT), Design of Mechanical Systems (DMS) and Electro Mechanical System Design (EMSD) and the Master of Science in Materials and Nanotechnology with the specializations in Materials Technology (MTEK) and Nanomaterials and Nanophysics (NNF).
PARTICULAR ATTENTION WILL BE GIVEN TO:
- Development of manufacturing system
- Engineering design of mechanical systems
- Design and control of power transmission systems
- Materials technology
- NanoTechnology
If any further information is needed please contact one of the chairmen Jørgen A. Kepler or Jens H. Andreasen
ABSTRACT SUBMISSION INFORMATION
A maximum of one page pdf or word document, which includes a description of the main problem adressed in the work and possible solutions, should be e-mailed to Jørgen Kepler, jk@mp.aau.dk.
Authors are required to prepare their abstract in accordance with the template that can be downloaded here.
PAPER SUBMISSION INFORMATION
A maximum of ten pages pdf or word document, which includes the problem adressed in the work and main results, should be sent to Line Mandrup Hansen, lmh@mp.aau.dk (deadline is 25 May), for publishing on the website symposium homepage (papers that are published on the website cannot contain confidential information).
Authors are required to prepare their paper in accordance with the template that can be downloaded here:
POSTER SUBMISSION INFORMATION
An A0 poster presenting the problem addressed and the results obtained, should be e-mailed to Line Mandrup Hansen, lmh@mp.aau.dk - deadline is 8 June at 10.00. Please send the poster as pdf file.
Authors are required to prepare their poster in accordance with the template that can be downloaded here:
Abstracts and papers
ABSTRACTS, PAPERS AND POSTERS 2023
ROBOTIC POSITIONING OF TEXTILE WRINKLES IN SEWING USING REINFORCEMENT LEARNING
Paper | Poster
SENSOR-MONITORED WEAR OF THE MECHANICALLY STRESSED SCREW IN A SCREW COMPACTOR
Paper | Poster
ANALYSIS OF FRONTAL PEDESTRIAN COLLISION AND REDESIGN OF AGILE SCX
Paper | Poster
DIGITAL DATA COLLECTION AND VISUAL PROGRESS PRESENTATION OF BM BUILDING INDUSTRIES ANALOGUE PRODUCTION PROCESSES
Paper | Poster
DIGITISATION AND DEVELOPMENT OF A TRACKING SYSTEM FOR SMALL RENTAL EQUIPMENT
Paper | Poster
OPTIMIZING FLOW AND QUALITY CONTROL OF SCAMPI
Paper | Poster
DESIGN OF EXPERIMENTAL SETUP FOR STUDIES OF A WIND ENERGY CONVERSION SYSTEM USING A POWER SPLIT DEVICE IN INDUSTRIAL WIND TURBINES
Paper | Poster
ENERGY RECOVERY SYSTEM FOR A UNIVERSAL ROBOT UR5
Paper | Poster
MULTI-SENSOR FUSION WITH RADAR AND ULTRASOUND FOR OBSTACLE AVOIDANCE ON CAPRA HIRCUS 1.0
Paper | Poster
THE SCIENCE OF COMPLIANCE: CONTINUOUS FIBER ANGLE TOPOLOGY OPTIMIZATION WITH STRESS CONSTRAINTS AND PATH-PLANNING
Paper | Poster
GEOMETRIC INSPECTION USING LINE SCANNING
Paper | Poster
OPERATIONS AND MAINTENANCE OF DIFFERENT CONFIGURATIONS AND SCENARIOS REGARDING AN OFFSHORE HYDROGEN WIND TURBINE FARM
Paper | Poster
CHARACTERIZATION OF PROPERTIES OF VIRGIN AND RECYCLED HIGH-DENSITY POLYETHYLENE UNDER CYCLIC LOADING
Paper | Poster
HOSPITAL WASTE SORTING
Paper | Poster
MODELLING MONOLAYER MOS2 IN AN EXTERNAL ELECTRIC FIELD WITH TIGHT BINDING
Paper | Poster
ABSTRACTS, PAPERS AND POSTERS 2022
DESIGN OF MECHANICAL SYSTEMS
VIBRATION ANALYSIS OF GRUNDFOS PUMP STATION FOR COMPONENT OPTIMIZATION BASED ON NUMERICAL MODELS
ABSTRACT | PAPER | POSTER
STRUCTURAL OPTIMISATION OF WEB TO SPARCAP CONNECTION
ABSTRACT | PAPER | POSTER
DESIGN OF SEMI-ACTIVE VIBRATION CONTROL DEVICE FOR COMMERCIAL PUMP SYSTEMS
ABSTRACT | PAPER | POSTER
MODELLING OF WIND TURBINE BLADE TRAILING EDGE CORE DESIGNED AND OPTIMIZED FOR RAPID PROTOTYPING
ABSTRACT | PAPER | POSTER
GRIPPING IN ANTHROPOMORPHIC ROBOTICS
ABSTRACT | PAPER | POSTER
DESIGN MODELING AND OPTIMIZATION OF A PASSIVE LOWER-LIMB EXOSKELETON
ABSTRACT | PAPER | POSTER
ELECTRO-MECHANICAL SYSTEM DESIGN
AUTOMATIC STEERING WHEEL SYSTEM FOR TRACTORS
ABSTRACT | PAPER | POSTER
MODELLING AND OPTIMUM REDESIGN OF RELUCTANCE MAGNETIC LEAD SCREW
ABSTRACT | PAPER | POSTER
MANUFACTURING TECHNOLOGY
VISION-BASED VIBRATOR CALIBRATION
ABSTRACT | PAPER | POSTER
FLEXIBLE AUTOMATION OF KITTING PROCESS AT ARLA
ABSTRACT | PAPER | POSTER
LEARNING ROBOT SKILL SEQUENCES WITH REINFORCEMENT LEARNING FOR OFF-PLANET ASSEMBLY
ABSTRACT | PAPER | POSTER
PROPOSING A PERFORMANCE METRIC FOR AN AGILE MANUFACTURING SYSTEM
ABSTRACT | PAPER | POSTER
CHALLENGES WITH FEATURE DETECTION IN 3D POINT CLOUDS. A MACHINE VISION PROJECT
ABSTRACT | PAPER | POSTER
MATERIALS AND NANOTECHNOLOGY
UTILIZATION OF RECYCLED HOUSEHOLD WASTE HDPE AND THE EFFECT OF INTRODUCING NEXAMITE R301
ABSTRACT | PAPER | POSTER
DIFFERENTIATION AND IDENTIFICATION OF POLYMERS USING LASER-INDUCED BREAKDOWN SPECTROSCOPY (LIBS) IN COMBINATION WITH MULTIVARIATE ANALYSIS TECHNIQUES
ABSTRACT | PAPER | POSTER
ABSTRACTS, PAPERS AND POSTERS 2021
DESIGN OF MECHANICAL SYSTEMS
Analysis and Optimization of Frequency Response of Electrodynamic Speaker Driver
ABSTRACT | PAPER | POSTER
Design and Analysis of Equipment for Load Introduction Full Scale Blade Test
ABSTRACT | PAPER | POSTER
Metal to Composite: Redesign of Centrifugal Pump Impeller
ABSTRACT | PAPER | POSTER
ELECTRO-MECHANICAL SYSTEM DESIGN
Advanced Motor Driver for Multiple Motor Configurations
ABSTRACT | PAPER | POSTER
Design of Motion Controller for Permanent Magnet Synchronous Motor
ABSTRACT | PAPER | POSTER
MANUFACTURING TECHNOLOGY
Transformation of Aalborg University SmartLab from Reconfigurable Manufacturing Systems to Matrix Production
ABSTRACT | PAPER | POSTER
ITowards Automated Scheduled Nesting for Flexible Manufacturing
ABSTRACT | PAPER | POSTER
Manufacturing Concepts for Laser Processing
ABSTRACT | PAPER | POSTER
Optimising Pre-Packaging Cycle-Times of LEGO Elements
ABSTRACT | PAPER | POSTER
MATERIALS AND NANOTECHNOLOGY
Effective Numerical Calculation of Second Harmonic Generation Using the Linear Analytic Tetrahedron Method and Piezoelectric Coefficients Using Berry Phase Theory
ABSTRACT | PAPER | POSTER
ABSTRACTS AND PAPERS 2020
DESIGN OF MECHANICAL SYSTEMS
Analysis and Design of Wind Turbine Blades using Simplified Global Models
ABSTRACT
Engineering of a System for Damping Oscillations During Single Blade Installation
ABSTRACT
Metal to composite: Impeller Redesign og Grundfos Centrifugal Pump
ABSTRACT
ELECTRO-MECHANICAL SYSTEM DESIGN
Design of Parallel Operation of Synchronous Motors for Production of Fans
ABSTRACT
MANUFACTURING TECHNOLOGY
Production networks for Lego Pre-packaging
ABSTRACT
Analysis and Verification of Manufacturing and Assembly Setup for Modular Jacket Options
ABSTRACT
Systems Intergration for Automated Prepreg Carbon Ply Foil Removal, Draping and Quality Inspection
ABSTRACT
MATERIALS AND NANOTECHNOLOGY
Processing and Characterization of Thermoplastic, Polyurethane (TPU) Foam and TPU-Composite Foam
ABSTRACT
Plasmonic Properties of Supported Metal Nanoparticles
ABSTRACT
Moddeling of Stress and Optimazation of the Manufacturing Process of Silicon Nitride Membranes
ABSTRACT
Characterization of Biobased Compites
ABSTRACT
PAPERS AND POSTERS 2019
DESIGN OF MECHANICAL SYSTEMS
Design of Composite Chassis for the Aquila Synergy Race Car
PAPER | POSTER
Design of Glass Fibre Reinforced Polyester Monocoque for Formula Student Race Car
PAPER | POSTER
Metal to Composite
PAPER | POSTER
Substructure Testing and Structural Optimisation of a Wind Turbine Blade Web Bond Detail
PAPER | POSTER
ELECTRO-MECHANICAL SYSTEM DESIGN
Control and implementation of a Permanent Magnet Synchronous Motor in a CowBrush unit
PAPER | POSTER
Permanent Magnet Synchronous Machine-Magnetic Lead Screw model based studies on passive and semi-active suspension
PAPER | POSTER
Redesign and Control of a Trolley Propulsion System with a PMSM using FOC
PAPER | POSTER
MANUFACTURING TECHNOLOGY
Agent-based framework for Reconfigurable Manufacturing Systems
PAPER | POSTER
Batching using reinforcement learning
PAPER | POSTER
MATERIALS TECHNOLOGY
Study of Functionalized Carbon Nanotubes Polymer Composites:
PAPER | POSTER
Using Calcium Carbonate to Alter the Mechanical Properties of Recycled High Density Polyethylene:
PAPER | POSTER
ABSTRACTS AND PAPERS 2018
Abstract and papers submitted for the symposium
The following abstracts related to ManufacturingTechnology has been submitted
Autonomous Mobile Platforms in Heavy Duty Industry
ABSTRACT
Developing an automated solution for packaging process at Vraa Dampvaskeri A/S
ABSTRACT
Optimization of the Brine Injection Process into Bacon using Supervised Learning and Reinforcement Learning
ABSTRACT
The following abstracts related to Materials Technology has been submitted
A Study of the Mechanical Properties of Chemically Functionalized Carbon Nanotubes Reinforced Epoxy
ABSTRACT
Autohesion in Press Fitted Polypropylene-Polypropylene Interfaces
ABSTRACT
The following abstracts related to Design of Mechanical Systems has been submitted
Redesign of Rotor Can for Hermetically Sealed Pump by Use of Composite Material
ABSTRACT
Plastic structure with vibration reducing means
ABSTRACT
Optimization of a Loading System for Tissue Engineering
ABSTRACT
The following abstracts related to Electro Mechanical System design has been submitted
Implementation of a Permanent Magnet Synchronous Motor Drive System in a Suspended Trolley Machine
ABSTRACT
Concept Study of PM Synchronous Motor Drive System in Cow Brush Application
ABSTRACT
ABSTRACTS AND PAPERS 2017
Abstract and papers submitted for the symposium
The following abstracts related to ManufacturingTechnology has been submitted
Virtual Commissioning of a Reconfigurable Manufacturing System
ABSTRACT
An Improved 3D Nummerical Model of Tube-Tubesheet Joint Roller Expansion Process
ABSTRACT
Quality Control for Leather Finishing in the Footwear Industry
ABSTRACT
Simulation of the Laser Welding Process
ABSTRACT
Architecture for Implementing Robotic Arc Welding in SMEs
ABSTRACT
The following abstracts related to Materials Technology has been submitted
Mode I Intralaminar Fracture Toughness in Carbon Fibre Reinforced Polyvinylidene Fluoride (PVDF)
ABSTRACT
The following abstracts related to Design of Mechanical Systems has been submitted
Design and Optimization of a Subfram Structure for the Agile Automotive SCX Car
ABSTRACT
Analysis and Re-Design of Spokes on Rotary Kiln
ABSTRACT
Design and Analysis of a Formula Student Carbon Fibre Rim
ABSTRACT
Redesign of the Leading Edge for Horizontal Stabiliser
ABSTRACT
The following abstracts related to Electro Mechanical System design has been submitted
Electronic Active Suspension System
ABSTRACT
Sensorless Control of a Hub-Mounted Switched Reluctance Machine
ABSTRACT
INFORMANTION ABOUT THE THIRD MECHMAN SYMPOSIUM
The third MechMan symposium was held the 19th of June 2015 at Aalborg University and 9 papers was submitted for the syposium. The symposium consisted of 9 oral presentations and 9 poster presentations and in total 60 students and staff members participated.
The symposium was sponsored by MAN Diesel & Turbo
BEST PAPER
Among the 9 papers the organising committee selected, "Investigation of the low-cycle fatigue behavior of welded T-joints in high strength steel" as the best paper.
The paper was written by A. Hvatov, C.S. Ahle, D.N. Pedersen, D.R. Andreasen, R. Stengaard and S. Hedegaard studying Design of Mechanical Systems.
BEST PRESENTATION
The best presentation was chosen by the participants in the symposium and the price was given to the presentation "3D Finite Element Modelling and Stability Optimisation of Large Offshore Wind Turbine Blades"
The presentation was given by J.S. Marciniak, E. Lemoine, P. Huus, M.H. Jungersen, D.J. Knutzen, and C. Krogh
studying Design of Mechanical Systems.
BEST POSTER
The best poster was also chosen by the participants in the symposium and the price was given to the poster "Investigation of the low-cycle fatigue behavior of welded T-joints in high strength steel"
The presentation was done by A. Hvatov, C.S. Ahle, D.N. Pedersen, D.R. Andreasen, R. Stengaard and S. Hedegaard studying Design of Mechanical Systems.
INFORMANTION ABOUT THE SECOND MECHMAN SYMPOSIUM
The second MechMan symposium was held the 19th of June 2015 at Aalborg University and 9 papers was submitted for the syposium. The symposium consisted of 9 oral presentations and 9 poster presentations and in total 60 students and staff members participated.
The symposium was sponsored by the Department of Mechanical and Manufacturing Engineering and the StudyBoard for Industry and Global Business Develoment.
BEST PAPER
Among the 7 papers the organising committee selected, "Development of U-core Switched reluctance motor for In-wheel drivetrain" as the best paper.
The paper was written by E. Bach-Sørensen, K. Kongerslev, P. S. Winther, R. Jæger and S. S. Nielsen studying Electro Mechanical System Designs.
BEST PRESENTATION
The best presentation was chosen by the participants in the symposium and the price was given to the presentation "Weight and Performance Optimisation of an Extreme RIB"
The presentation was given byL. Ledet, D. Høegh, C. Merrild, S. Palmero and D. Rey
studying Design of Mechanical Systems.
BEST POSTER
The best poster was also chosen by the participants in the symposium and the price was given to the poster "Low Cycle Fatigue of High Strength Steel"
The presentation was done by S. Corre, S.G. Hanachiuc, R.D. Jensen, H.B. Kleppe and J.H. Pedersen studying Design of Mechanical Systems.
INFORMANTION ABOUT THE FIRST MECHMAN SYMPOSIUM
The first MechMan symposium was held the 21st of June 2013 at Aalborg University and 9 papers was submitted for the syposium. The symposium consisted of 9 oral presentations and 9 poster presentations and in total 50 students and staff members participated.
The symposium was sponsored by the Department of Mechanical and Manufacturing Engineering and the StudyBoard for Industry and Global Business Develoment.
BEST PAPER
Among the 9 papers the organising committee selected, "Optimisation of Rims for SHELL Eco-Marathon Vehicle to Improve Fuel Efficiency" as the best paper.
The paper was written by J. S. Stoltze, M. B. Nielsen, S. V. Pedersen, N. H. Petersen, R. A. W. Peters, and I. A. Garroguerricaechevarria studying Design of Mechanical Systems.
BEST PRESENTATION
The best presentation was chosen by the participants in the symposium and the price was given to the presentation "Control System Development - For the T-tube Hydroforming Process "
The presentation was done by K. Madsen, M. Søndergaard and R. Ravendran studying Manufacturing Technology.
BEST POSTER
The best poster was also chosen by the participants in the symposium and the price was given to the poster "Design of a Monocoque for an LMP1 Race Car "
The presentation was done by S. K. Jakobsen, J. M. Laustsen, J. G. Jørgensen, N. K. Grishauge, J. J. Bender and J. A. Ammundsen studying Design of Mechanical Systems.
