AAU logo

Abstracts, papers and Powerpoints

Book of abstracts

 

Oral Presentations

Plenary lectures:


Professor Pedro Camanho, Department of Mechanical Engineering, University of Porto, Portugal. Title: ‘Mechanics of Ultra-thin Ply Laminates’

Professor Geoff Gibson, School of Mechanical and Systems Engineering, Director of Centre for Composite Materials Engineering, University of New Castle, UK. Title: ‘Issues in Characterising and Modelling the Response of Aerospace Composites to Fire’

Dr. Torben K. Jacobsen, Director Materials & Process, LM Windpower A/S. Title: ‘Wind Turbine Blade Materials and Structures - State-of-the-art and Future Developments’

Oral session 1 – ‘Damage and fracture’ (5 presentations)


ID#165, VALIDATION OF FEM BASED DAMAGED LAMINATE MODEL MEASURING CRACK OPENING DISPLACEMENT IN CROSS-PLY LAMINATE USING ELECTRONIC SPECKLE PATTERN INTERFEROMETRY (ESPI)

ID#150, INFLUENCE OF TRANSVERSE CRACKS ON THE ONSET OF DELAMINATION, APPLICATION TO L-ANGLE COMPOSITE SPECIMENS

ID#148, MIXED-MODE TRANSLAMINAR FRACTURE: FAILURE ANALYSIS, FRACTOGRAPHY AND NUMERICAL MODELLING

ID#149, MODELLING THE SIZE-DEPENDENT MODE I TRANSLAMINAR FRACTURE TOUGHNESS OF UNIDIRECTIONAL FIBRE-REINFORCED COMPOSITES

ID#88, DAMAGE MECHANISMS OF 3D WOVEN HYBRID COMPOSITES LOADED IN TENSION. TESTING, INSPECTION AND SIMULATION

Oral session 2 – ‘Modelling & constitutive behaviour’ (5 presentations)


ID#60, EMBEDDED ELEMENT METHOD IN MESO-FINITE ELEMENT MODELING OF TEXTILE COMPOSITES

ID#85, DEVELOPMENT OF CONSTITUTIVE MATERIAL MODEL FOR COMPOSITE WITH NONLINEAR FIBERS AND MATRIX

ID#53, VALIDATION OF SIMULATED UNIDIRECTIONAL COMPOSITES MICROSTRUCTURE: STATISTICAL EQUIVALENCE TO REAL FIBRE ARRANGEMENTS

ID#125, CYCLIC DEFORMATION OF POLYETHYLENE/CLAY NANOCOMPOSITES: OBSERVATIONS AND CONSTITUTIVE MODELING

ID#140, EXPERIMENTAL CHARACTERIZATION AND MODELING OF THIN PLY-SIZE EFFECT

Oral session 3 – ‘Fracture and fatigue - 1’ (5 presentations)


ID#130, DEBOND GROWTH ASSESSMENT IN GFRP-BALSA SANDWICH STRUCTURES

ID#133, EXPLICIT EXPRESSIONS FOR THE CRACK LENGTH CORRECTION PARAMETERS FOR THE DCB, ENF, AND MMB TESTS ON MULTIDIRECTIONAL LAMINATES

ID#139, STRESS-STRAIN ANALYSIS OF A CARBON PPS DURING AND AFTER FATIGUE LOADING CONDITIONS

ID#87, X-RAY TOMOGRAPHY ASSESSMENT OF DAMAGE DURING TENSILE DEFORMATION OF ±45°
CARBON FIBER LAMINATES

ID#118, USE OF DIC FOR THE FAILURE ANALYSIS OF COMPLEX COMPOSITE STRUCTURES

Oral session 4 – ‘Fracture and fatigue - 2’ (4 presentations)


ID#110, PROBABILISTIC ANISOMORPHIC CONSTANT FATIGUE LIFE DIAGRAM APPROACH TO PREDICTION OF
P-S-N CURVES FOR COMPOSITES

ID#55, AUTOMATED DELAMINATION LENGTH VIDEO TRACKING IN STATIC AND FATIGUE DCB TEST

ID#152, EFFECT OF THE CRACK LENGTH MONITORING TECHNIQUE DURING FATIGUE DELAMINATION
TESTING ON CRACK GROWTH DATA

ID#166, BIAXIAL FATIGUE TESTING OF GLASS/EPOXY COMPOSITE TUBES

Oral session 5 – ‘Defects, delamination and debonding’ (4 presentations)


ID#28, TENSION AND COMPRESSION TESTING OF MULTI-DIRECTIONAL LAMINATES WITH ARTIFICIAL OUT OF PLANE WRINKLING DEFECTS

ID#77, EFFECTS OF IN-PLANE WAVINESS ON THE PROPERTIES OF CARBON COMPOSITES - EXPERIMENTAL
AND NUMERICAL ANALYSIS

ID#142, EXPERIMENTAL VALIDATION OF A MATRIX CRACK INDUCED DELAMINATION CRITERIA

ID#91, DETERMINATION OF FIBER/MATRIX INTERFACE DEBOND GROWTH PARAMETERS FROM CYCLIC LOADING OF SINGLE FIBER COMPOSITES

Oral session 6 – ‘Damage and dynamic properties’ (4 presentations)


ID#49, FULL-FIELD CURVATURE MEASUREMENTS TO ASSESS IMPACT DAMAGE IN COMPOSITE PLATES
USING AN INDICATOR BASED ON MECHANICAL EQUILIBRIUM

ID#136, CALIBRATION OF LS-DYNA STRAIN RATE DEPENDENT COMPOSITE MATERIAL MODELS

ID#37, DAMAGE ACCUMULATION INVESTIGATION IN FIBER-REINFORCED POLYMER-MATRIX COMPOSITES: FROM TEST COUPONS TO STRUCTURAL ELEMENTS

ID#154, DCB FRACTURE SPECIMENS WITH SIDE NOTCHES

Oral session 7 – ‘Test methods’ (3 presentations)


ID#92, NOVEL TEST SETUP FOR DETERMINATION OF HIGH TEMPERATURE MECHANICAL PROPERTIES OF COMPOSITES

ID#119, STATIC STRAIN AND DEFORMATION CONTROLLED TESTING OF COMPOSITE BEAMS

ID#155, THE USE OF DIGITAL IMAGE CORRELATION FOR FULL FIELD ANALYSIS OF POLYMER FOAMS

Oral session 8 – ‘Health/condition monitoring’ (3 presentations)


ID#21, SELF-SENSING OF DAMAGE IN CARBON NANOTUBE VINYL ESTER COMPOSITES

ID#107, INFLUENCE OF THE PROTECTIVE COATING OF FIBER BRAGG GRATING SENSORS ON THE STRUCTURAL DISTORTION AND SENSING ACCURACY WHEN EMBEDDED IN FIBER REINFORCED POLYMERS

ID#157, MONITORING STRAIN GRADIENTS IN ADHESIVE COMPOSITE JOINTS BY EMBEDDED FIBRE BRAGG GRATING SENSORS

Oral session 9 – ‘Fracture and fatigue - 3’ (5 presentations)


ID#89, ON THE USE OF IN-SITU SEM TESTING AND SIMULATION TO STUDY DEFORMATION AND FAILURE MECHANISMS IN COMPOSITE MATERIALS

ID#134, BIO-BASED COMPOSITES WITH DIFFERENT MOISTURE CONTENTS UNDER STATIC AND DYNAMIC LOADING

ID#52, FAILURE MODE SPECIFIC FATIGUE TESTING OF NANOPARTICLE-MODIFIED CFRP UNDER VHCF-LOADING

ID#101, EXPERIMENTAL AND NUMERICAL ANALYSIS OF SKIN/STIFFENER DEBONDING UNDER BENDING

ID#95, QUANTIFICATION OF DAMAGE DUE TO ENVIRONMENTAL CONDITIONS ON CARBON FIBRE/EPOXY COMPOSITE SAMPLES

Oral session 10 – ‘Testing, material concepts and joining’ (3 presentations)


ID#167, SECUNDARY STRESS EFFECTS DURING LOAD INTRODUCTION INTO UNIDIRECTIONAL COMPOSITE TEST COUPONS

ID#82, DISCONTINUOUS-PLY COMPOSITES FOR ENHANCED DUCTILITY

ID#144, THE EFFECT OF PRE-BOND MOISTURE AND TEMPERATURE ON THE FRACTURE TOUGHNESS OF BONDED JOINTS FOR COMPOSITE REPAIRS

Poster Presentations

Poster session 1 (9 posters) on ‘Damage and Failure’


ID#29, CHARACTERISATION OF BRIDGING MECHANISMS IN A SINGLE Z-PINNED COMPOSITE LAMINATE

ID#138, CHOICE OF AN ANALYTICAL SCHEME IN CORRELATING STRAIN ENERGY RELEASE RATE, CRACK LENGTH AND OPENING OF THE FACES OF AN ADHESIVELY BONDED, THICK COMPOSITE DCB SPECIMEN

ID#146, CFRP FATIGUE TESTING AND ISSUES FOR AERONAUTICAL APPLICATIONS

ID#156, EFFECT OF PLY THICKNESS ON THE FATIGUE DELAMINATION GROWTH IN TAPERED LAMINATES: MEASUREMENTS AND ANALYSIS

ID#25, IDENTIFICATION OF DAMAGE MODES IN CERAMIC MATRIX COMPOSITES BY ACOUSTIC EMISSION SIGNAL
PATTERN RECOGNITION

ID#27, LIFETIME PREDICTION WITH ACOUSTIC EMISSION DURING STATIC FATIGUE TESTS ON CERAMIC MATRIX
COMPOSITE AT HIGH TEMPERATURE UNDER AIR

ID#126, HIGH-SPEED DIC FOR BLAST TESTING OF COMPOSITE PANELS

ID#67, THE EFFECT OF VARIOUS DIFFUSE DAMAGE LEVELS ON THE TRANSVERSE CRACKING EVOLUTION FOR T700/M21 CROSS-PLY LAMINATED COMPOSITES

ID#129 , A NEW DAMAGE TOLERANT DESIGN APPROACH FOR SANDWICH PANELS LOADED IN FATIGUE

Poster session 2 (11 papers) on ‘Manufacturing/processing & materials characterisation’


ID#31, ON THE USE OF DIGITAL IMAGE CORRELATION TO DETERMINE THE PERMEABILITY AND COMPACTION LAW OF FABRICS IN VACUUM INFUSION PROCESS

ID#46, FABRIC PERMEABILITY TESTING AND THEIR USE IN INFUSION SIMULATION

ID#73, SHRINKAGE AND THERMAL EXPANSION MODEL FOR A GLASS/EPOXY LAMINATE

ID#83, EXAMINATION OF COMPRESSION AND SHEAR PROPERTIES OF GLASS/CARBON HYBRID LAMINATED COMPOSITES

ID#103, EVALUATION OF THE MECHANICAL PROPERTIES OF POLYMER CONCRETES UNDER VARIOUS CONDITIONS

ID#114, GEOMETRICAL CHARACTERIZATION & MICRO-STRUCTURAL MODELLING OF SHORT STEEL
FIBER REINFORCED COMPOSITES

ID#64, STRAIN GAUGE APPLICATION IN SOFT MATERIAL TESTING

ID#96, METHODOLOGY OF MATERIAL PARAMETERS IDENTIFICATION IN SANDWICH PANELS VERSUS COMPUTER SIMULATION

ID#63, VALIDATION OF SHORT DYNAMIC SPECIMEN GEOMETRY FOR IDENTIFICATION OF RATE DEPENDENT MODEL ON A LARGE RANGE OF STRAIN RATES

ID#94, INTEGRATION OF MICROSTRUCTURED OPTICAL FIBRES INTO CARBON FIBRE REINFORCED PLASTIC MATERIALS – DETERMINATION OF THE INITIAL STRAIN STATE

ID#158, ID#158Poster, A MICRO-COMPUTER TOMOGRAPHY TECHNIQUE TO STUDY THE INTERACTION BETWEEN THE COMPOSITE MATERIAL AND AN EMBEDDED OPTICAL FIBER SENSOR

Poster session 3 (9 papers) on ‘Material concepts, modelling and applications'


ID#22, MODAL-BASED DAMAGE IDENTIFICATION IN COMPOSITE STRUCTURES USING SPATIAL WAVELET TRANSFORM

ID#56, A STUDY ON THE LOW-VELOCITY IMPACT CHARACTERISTICS OF IMPACT LIMITER MATERIALS FOR NUCLEAR SPENT FUEL TRANSPORT CASK

ID#62, POST-FIRE MECHANICAL PROPERTIES OF MARINE SANDWICH COMPOSITES

ID#108, DEVELOPMENT OF AUTOMATED FINITE ELEMENT MODELS FOR LARGE WIND TURBINE BLADES

ID#127, BEND-TWIST COUPLING IDENTIFICATION IN COMPOSITE BEAMS

ID#135, CHANGES IN MECHANICAL BEHAVIOUR OF A GLASS FIBRE REINFORCED EPOXY BY ADDING POLYAMIDE 6 NANO-FIBRES

ID#137, PSEUDO-GRAIN DISCRETIZATION AND FULL MORI TANAKA FORMULATION FOR RANDOM HETEROGENEOUS MEDIA: PREDICTIVE ABILITIES FOR STRESSES IN INDIVIDUAL INCLUSIONS AND THE MATRIX

ID#86, MECHANICAL AND MORPHOLOGICAL PROPERTIES OF TALC FILLED HIGH DENSITY POLYETHYLENE

ID#117, ID#117-oral, MIXED MODE DELAMINATION IN HYBRID LAMINATE UNDER DMMB TEST

Contact

Lis Hjortshøj Bach

Department of Mechanical and Manufacturing Engineering, Aalborg University
Fibigerstræde 16, DK-9220 Aalborg East, Denmark
Phone: +45 9940 8981, Fax: +45 9940 7110

E-mail: lis@m-tech.aau.dk

Ole Thybo Thomsen

Department of Mechanical and Manufacturing Engineering, Aalborg University
Fibigerstræde 16, DK-9220 Aalborg East, Denmark
Phone: +45 9940 9319, Mobile: +45 2895 9151

E-mail: CompTest2013@m-tech.aau.dk